The Custom Steel Masonry Concrete Screw Anchor is an ef […]
The Custom Steel Masonry Concrete Screw Anchor is an effective solution for a variety of masonry and concrete installations. Using this screw anchor is fast and easy. It features high-low threads for superior stability, as well as an advanced R-Blocker(tm) coating that ensures superior hold and pull-out strength. For close-edge applications, the tapered shank is a convenient tool for installing this type of anchor.
Its safety factor of 4:1 (25%) is based on the masonry material's density. For critical applications, the safety factor may be as high as 10:1 or higher. Moreover, its screw length should be adjusted according to the thickness of the material to be fastened. For example, if the masonry material is 3/4 inches thick, then the recommended embedment is 1/2". However, this recommendation only applies to soft masonry.
The custom-made concrete screw anchor replaces sheet metal and plastic anchors. Its heat-treated carbon steel construction and zinc and yellow dichromate plating ensures that this fastener is resistant to corrosion and will not rust or peel off. Designed to be installed in concrete, stone, brick, and soft masonry, this screw can be embedded up to 1/4". There is a special drill bit included with the box of 100 screws.
A custom steel masonry concrete screw anchor is an effective way to secure a masonry structure. The custom-made screw anchor is the most effective solution for securing brick or stone to concrete. The screws are easy to install and have a high holding power. They also come in nine different lengths, from one-half inch to six inches. The length of the masonry material can vary. With this anchor, a 7/32" hole is required for installation.
The Concrete Screw Anchor replaces sheet metal and plastic anchors. The concrete screw anchor is made of heat-treated carbon steel with yellow dichromate and zinc plating to prevent embrittlement. The customized stainless steel screws have mushroom heads and can be inserted up to one-fourth inch in soft masonry. They are available in many different sizes. A custom-steel masonry screw anchor will fit any masonry structure.
A custom-steel screw anchor is the best option for attaching masonry structures. A custom-steel concrete screw anchor eliminates the need for sheet metal and plastic anchors. Its heat-treated carbon steel is plated with zinc or yellow dichromate for durability. A single concrete screw anchor can be used for up to one-quarter inch of masonry. In addition to their excellent holding strength, they are easy to install.
This custom-steel concrete screw anchor is used for light to medium-duty fastening applications. The concrete screw is made of heat-treated carbon steel and is plated with zinc or yellow dichromate. They can penetrate up to one-quarter inch of soft masonry and are suitable for use in a variety of applications. There are two sizes of the custom-steel anchor: the cement screw is used for heavier load applications.